Project

General

Profile

Issues

Filters

Apply Clear

# Project Tracker ID Source Status Priority Standard(s) Subject Updated
4062 WG13 Issues CIM Issues Closed Normal MetaBlockReference.equationType is not enumeration The att 09/14/2021 03:43 PM Actions
3939 WG13 Issues CIM Issues Closed Normal "Planning"; "Operational" profiles 09/14/2021 03:43 PM Actions
407 IEC 61850 User Feedback Task Force Feature 3.1 ENTSO-E Closed Normal "Vendor/User” and “Vendor/Vendor” Interoperability list 02/11/2021 06:17 AM Actions
492 IEC 61850 User Feedback Task Force Support 7 IOP_2015 Closed Normal

6

 (a) If a device does not support configuration of the ctlModel for a specific DO – what is the correct way to declare this? • De 06/21/2022 09:12 AM Actions
4148 WG13 Issues CIM Issues Closed Normal 1. DateTime needs to be defined. 2. XaxisType, XaxisUnits 09/14/2021 03:44 PM Actions
509 IEC 61850 User Feedback Task Force Support 24 IOP_2015 Closed Normal

IEC 61850-7-2

 1. Report Control Block is disabled and four events (four reports) are generated2. Client sends MMS Write RptEna=true to the BR 06/21/2022 09:12 AM Actions
5038 WG13 Issues CIM Issues Closed Low 18 CIM attributes whose name starts with the name of contai 10/20/2023 01:24 PM Actions
500 IEC 61850 User Feedback Task Force Support 15 IOP_2015 Closed Normal

6

 2.2. BufMod is optional for ReportControl. No default value provided by the schema. SCT is interpreting as unbuffered only. Com 06/21/2022 09:12 AM Actions
3956 WG13 Issues CIM Issues Closed Normal 61970-301 document and others should be officially released 09/14/2021 03:43 PM Actions
4325 WG13 Issues CIM Issues Closed Normal 61970-302 mentions associations between classes that are de 09/14/2021 03:45 PM Actions
456 IEC 61850 User Feedback Task Force Support 13 IOP_2013 Closed Normal A client only ICD did not have a ClientServices section. An SCT imported the file and assigned used the IED to reserve a RCB wit 06/21/2022 09:00 AM Actions
480 IEC 61850 User Feedback Task Force Support 36 IOP_2013 Closed Normal A different client made use of a URCB that had been reserved in SCL for use by a different client via ClientLN. Currently, there 06/21/2022 09:00 AM Actions
4093 WG13 Issues CIM Issues Closed Normal A few smaller HVDC issues - power factor control is needed 09/14/2021 03:44 PM Actions
534 IEC 61850 User Feedback Task Force Feature 15 IOP_2017/24 Closed Normal

IEC 61850-6, IEC 61850-7-2

 A GCB or MSVCB can only have one single control block address entry in the whole communication section 06/21/2022 09:24 AM Actions
5749 WG16 Issues CIM Issues Closed Normal A new association is needed between MarketDocument and DateAndOrTime 07/19/2022 05:58 PM Actions
4333 WG13 Issues CIM Issues Closed Normal A part of the characted line can't be seen (AbsoluteDateTim 09/14/2021 03:45 PM Actions
4334 WG13 Issues CIM Issues Closed Normal A part of the character line can't be seen (CompensatorType 09/14/2021 03:45 PM Actions
4331 WG13 Issues CIM Issues Closed Normal A part of the character line can't be seen (CostPerEnergyUn 09/14/2021 03:45 PM Actions
4330 WG13 Issues CIM Issues Closed Normal A part of the character line can't be seen (Counter class a 09/14/2021 03:45 PM Actions
4332 WG13 Issues CIM Issues Closed Normal A part of the character line can't be seen (TimeStamp class 09/14/2021 03:45 PM Actions
4337 WG13 Issues CIM Issues Closed Normal A part of the figure does not appear in the document as wel 09/14/2021 03:45 PM Actions
484 IEC 61850 User Feedback Task Force Support 40 IOP_2013 Closed Normal A question was raised in regards can Report EntryIDs be reused after IED restart. If so, guidance needs to be given for system d 06/21/2022 09:00 AM Actions
481 IEC 61850 User Feedback Task Force Support 37 IOP_2013 Closed Normal A question was raised in regards to how a client should resynchronize to receive the last report (Buffered Reporting). The sta 06/21/2022 09:00 AM Actions
483 IEC 61850 User Feedback Task Force Support 39 IOP_2013 Closed Normal A question was raised in regards to the expected behavior of a server/BRCB that has been purged (e.g. no events buffered) and th 06/21/2022 09:00 AM Actions
591 IEC 61850 User Feedback Task Force Feature 1857 IOP_2019 Closed Normal

IEC 61850-6

 A reservation could not be made via SCL for an IED’s report due to the lack of a ConnectedAP associated with the client’s AP 07/05/2022 08:34 AM Actions
457 IEC 61850 User Feedback Task Force Feature 14 IOP_2013 Closed Normal

IEC 61850-6

 A SCL file is created without maxAttributes attribute defined. What does it mean semantically it the attr. is missing? 02/11/2021 07:46 AM Actions
4460 WG13 Issues CIM Issues Closed Normal a) The class name starts with a number b) The attributes ha 09/14/2021 03:45 PM Actions
4175 WG13 Issues CIM Issues Closed Normal AbsoluteDate.value and IntervalTime.value reference undefin 09/14/2021 03:44 PM Actions
4344 WG13 Issues CIM Issues Closed Normal AbsoluteDateTime's 'value' attribute, which is of type Time 09/14/2021 03:45 PM Actions
4800 WG13 Issues CIM Issues Closed Normal AccuracyClass needs some discussion. Issue of why associa 09/14/2021 03:47 PM Actions
4955 WG13 Issues CIM Issues Closed Normal ACDCConverter.nomUdc is not needed and confusing Remove att 09/14/2021 03:47 PM Actions
4968 WG13 Issues CIM Issues Closed Normal ACDCConverterDCTerminal class has no note Need to have a no 09/14/2021 03:47 PM Actions
4112 WG13 Issues CIM Issues Closed Normal ACLineSegment base voltage IOP suggest adding explanations 09/14/2021 03:44 PM Actions
4270 WG13 Issues CIM Issues Closed Normal ACLineSegment needs reference to BaseVoltage. At the moment 09/14/2021 03:44 PM Actions
4779 WG13 Issues CIM Issues Closed Normal Actual status of state solution Reuse of ActivityRecord fro 09/14/2021 03:46 PM Actions
4298 WG13 Issues CIM Issues Closed Normal Add a frequency converter to the CIM. 09/14/2021 03:45 PM Actions
4320 WG13 Issues CIM Issues Closed Normal Add a logical node to Topology to allow for harmonization w 09/14/2021 03:45 PM Actions
4351 WG13 Issues CIM Issues Closed Normal Add a master resource identifier to the naming class. This 09/14/2021 03:45 PM Actions
5819 WG16 Issues CIM Issues Closed Normal Add a new class Fuel (with attributes fuel and fuelSource). 08/08/2022 05:49 PM Actions
5809 WG16 Issues CIM Issues Closed Normal Add a new EnergyTechnologyAndFuel class in the MarketManagement package 10/13/2023 04:12 PM Actions
5827 WG16 Issues CIM Issues Closed Normal Add a new ResourceBid specialized class called DistributedBid 08/08/2022 05:52 PM Actions
5806 WG16 Issues CIM Issues Closed Normal Add administrativeStatus attribute (String) in the MarketEvaluationPoint class 10/13/2023 04:13 PM Actions
5772 WG16 Issues CIM Issues Closed Normal Add an association between MarketProduct class and TimeSeries 08/08/2022 05:24 PM Actions
5744 WG16 Issues CIM Issues Closed Normal Add an association between the class Domain and the class Price, 07/19/2022 05:51 PM Actions
5743 WG16 Issues CIM Issues Closed Normal Add an association between the class Domain and the class Quantity 07/19/2022 05:50 PM Actions
4368 WG13 Issues CIM Issues Closed Normal Add an identification attribute to naming class. Needs to c 09/14/2021 03:45 PM Actions
4203 WG13 Issues CIM Issues Closed Normal Add Attribute Type for All Enumeration Classes. For every 09/14/2021 03:44 PM Actions
5807 WG16 Issues CIM Issues Closed Normal Add contractedConnectionCapacity attribute (DecimalQuantity) in the MarketEvaluationPoint class 10/13/2023 04:13 PM Actions
5808 WG16 Issues CIM Issues Closed Normal Add disconnectionContract attribute (Boolean) in the MarketEvaluationPoint class 10/13/2023 04:12 PM Actions
5053 WG13 Issues CIM Issues Closed Normal Add explanatory text to show the differences between BusbarSection and Junction 10/22/2021 02:30 PM Actions
(1-50/1448) Per page: 25, 50, 100

Also available in: Atom CSV PDF