Project

General

Profile

Issues #6203

sSvs6 - Test configuration does not consider available bandwidth

Added by Thierry Dufaure over 1 year ago. Updated 27 days ago.

Status:
Closed
Priority:
Normal
Due date:
02/07/2023
Discuss in Upcoming Meeting:
No
Clause Reference:
61850 Standard:
9-2
Triggering Tissue:
Final Decision:
Initial Test Document:
Updated Test Document:
Test Case ID:
sSvs6
Closed Reason:
--Not Set---
Triggering Tissue 2:
Triggering Tissue 3:

Description

Configuration requires: "DUT to subscribe the maximum number of SV streams, with
- 1) the maximum preferred variant of all preferred variants
- 2) and the remainder the lowest rate backwards compatible configuration.

-> the remainder configuration using the lowest rate backwards compatible - force to use I4U4 DataSets. The remaining bandwidth of 100MBit/s might not be sufficient to apply 2). 2 shall be flexible in defining the "remainder" - allowing also I1U0 or U0I1 with lowest rate in order to make the configuration fit in 100MBit/s (and maybe even 60% of 100MBit/s to have a reliable network).

Proposal: change 2) to "and the remainder the lowest rate with backwards compatible configuration or other configurations to fit in the remaining available bandwidth.


Files

Solution to redmine 6203 sSvs6.docx Solution to redmine 6203 sSvs6.docx 25.5 KB Richard Schimmel, 01/24/2023 09:36 AM
#1

Updated by Richard Schimmel about 1 year ago

Disagree. Endusers need to know how many BW streams the DUT does support. As such it's easier to compare devices. Of course there is a bandwidth limitation.

#2

Updated by Richard Schimmel about 1 year ago

  • Status changed from New to In Progress
#3

Updated by IEC 61850 TPWG about 1 year ago

  • Due date changed from 01/10/2023 to 01/24/2023

Discuss when Richard is available.

#4

Updated by IEC 61850 TPWG about 1 year ago

  • Due date changed from 01/24/2023 to 02/07/2023
  • Assignee set to Richard Schimmel

Agreed as proposed by Thierry.

#5

Updated by Richard Schimmel about 1 year ago

Added solution as proposed

#6

Updated by IEC 61850 TPWG about 1 year ago

  • Status changed from In Progress to Resolved
#7

Updated by Richard Schimmel 27 days ago

  • Status changed from Resolved to Closed
  • Updated Test Document set to TP1.3

Also available in: Atom PDF