Support #580
Voltage protection: Undervoltage protection - 3ph operate
Status:
Resolved
Priority:
Normal
Assignee:
-
Category:
Standard extension required
Start date:
02/16/2021
Due date:
08/16/2021 (over 2 years late)
% Done:
0%
Estimated time:
ID:
52
Source:
ENTSO-E
TF Unique ID:
52 # ENTSO-E
WG10 Proposal:
Estimated Completion:
Discuss in Upcoming Meeting:
No
To discuss in WG10:
No
Short Proposal:
ENTSO-E to submit additional information.
Standard(s):
IEC 61850-7-500
Needs More Information:
No
Assigned TF:
Description
Voltage protection: Undervoltage protection - 3ph operate
Related issues
Updated by Vladan Cvejic about 3 years ago
- Category set to Standard extension required
- Status changed from New to In Progress
- Standard(s) set to IEC 61850-7-4, 7-5
- Discuss in Upcoming Meeting set to No
Checking done.
Updated by Vladan Cvejic about 3 years ago
- Status changed from In Progress to Triage
- Short Proposal set to ENTSO-E to submit additional information.
- To discuss in WG10 set to No
ENTSO-E to submit additional information.
Updated by Vladan Cvejic about 3 years ago
- Due date set to 08/16/2021
- Start date set to 02/16/2021
Updated by Tom Berry about 2 years ago
I think the requirement is to produce Op and Tr signals when there is an undervoltage on all 3 phases = an AND function.
As standard, the PTUV.Op is an OR function - at least one phase is under-voltage
Proposal : add a setting
NumPhsStr ENG Number of phases to start detection: values 1,2,3. If the DO is not present detection starts when one phase is undervoltage
See issue #579
Updated by Vladan Cvejic about 2 years ago
- Status changed from Triage to Resolved
- Proposal descriptions updated (diff)
Updated by Carlos Rodriguez del Castillo 12 months ago
- Standard(s) changed from IEC 61850-7-4, 7-5 to IEC 61850-7-500
- Needs More Information set to No
Updated by Vladan Cvejic 10 months ago
- Copied to IEC61850-7-5 #6385: Voltage protection: Undervoltage protection - 3ph operate added