Carlos Rodriguez del Castillo
- Login: calrodriguez@elewit.ventures
- Registered on: 02/02/2021
- Last connection: 12/12/2024
Issues
| open | closed | Total | |
|---|---|---|---|
| Assigned issues | 15 | 7 | 22 |
| Reported issues | 44 | 10 | 54 |
Projects
| Project | Roles | Registered on |
|---|---|---|
| IEC TC57 WG10 Future Work | WG10 Future Work Manager | 10/07/2021 |
| IEC 61850 User Feedback Task Force | Reporter, MANAGER_UFTF | 02/02/2021 |
Activity
11/19/2024
- 08:07 AM IEC 61850 User Feedback Task Force Improvement #7039 (Closed): Simulation bit for test systems
- 7-1 section 7.8.2 Figure 40 refers as "Simulation device" the device that is sending simulation Goose
7-2 Table 94 a...
10/22/2024
- 09:37 AM IEC 61850 User Feedback Task Force Improvement #6992 (Resolved): Add identifier to KDC
- We hade feedback:
"No practical use case regarding that. It`s only an improvement request, because according to Stan... - 09:23 AM IEC 61850 User Feedback Task Force Feature #7033 (Resolved): Addition of DO SPS in the LN KPMP
- Inform to Alexander Winterer about this issue for his task force.
- 09:18 AM IEC 61850 User Feedback Task Force Feature #7032 (Triage): Addition of a DO in XCBR indicating that the contacts have started to separate
- We need more information about why we would need a new DO.
We will have anyway to check abbreviations from 7-4 since... - 09:09 AM IEC 61850 User Feedback Task Force Bug #7030 (Resolved): Is there a use case for applying more than one trgOpt on a particular DA?
- We could not find a use case where having both trigger conditions set for a given data attribute (DA) would make sens...
- 08:15 AM IEC 61850 User Feedback Task Force Bug #7001 (Resolved): Presence condition of DO in statistic Logical Nodes
09/24/2024
- 08:39 AM IEC 61850 User Feedback Task Force Bug #7001 (In Progress): Presence condition of DO in statistic Logical Nodes
- We think it is a bug in the document generation, we have to investigate.
- 08:33 AM IEC 61850 User Feedback Task Force Improvement #6992 (Triage): Add identifier to KDC
- This issue comes up when you have differente KDC servers in the system, and you need to know which one the client has...
- 08:14 AM IEC 61850 User Feedback Task Force Improvement #6803 (Resolved): In part 6, the reference of "pure client" LN by LNodes is not clear.
- A clarification in the standard is needed since it is not clear to use LD0 for pure clients where no logical devices ...
- 08:09 AM IEC 61850 User Feedback Task Force Improvement #6810 (Resolved): Amending Txxx LN classes with settings for adapting the signal
Also available in: Atom