Issues #6769
sGop9 should allow NdsCom to be set in the GOOSE message
Due date:
07/09/2024
Discuss in Upcoming Meeting:
No
Clause Reference:
61850 Standard:
Triggering Tissue:
Final Decision:
Initial Test Document:
Updated Test Document:
Test Case ID:
Closed Reason:
Test Procedure Update
Triggering Tissue 2:
Triggering Tissue 3:
Description
If the server sends GOOSE messages when the GoCB.NdsCom is true, then the GOOSE message.NdsCom shall be true as well.
The test needs to be corrected to allow
1) to refuse the incorrect configuration while import SCD
2) to ignore parts of the new configuration
3) to accept the configuration
3.1) The GoCB.NdsCom is set to TRUE.
3.2) If the GoCB can be enabled (SetGoCBValues.resp+), then the GOOSE message.NdsCom shall be set to true
3.3) If the GoCB cannot be enabled (SetGoCBValues.resp-)
Files
Updated by IEC 61850 TPWG 7 months ago
- Subject changed from sGop9 should allow NdsCom to be set to sGop9 should allow NdsCom to be set in the GOOSE message
- Due date set to 05/28/2024
- Status changed from New to In Progress
- Assignee set to Richard Schimmel
Updated by Richard Schimmel 7 months ago
Solution attached
Updated by IEC 61850 TPWG 6 months ago
- Status changed from Resolved to In Progress
Test needs conditions on MMS services supported.
Updated by Richard Schimmel 6 months ago
Updated the solution.
Updated by IEC 61850 TPWG 6 months ago
- File Solution to redmine 6769 sGop9 Jun11.docx Solution to redmine 6769 sGop9 Jun11.docx added
- Due date changed from 06/11/2024 to 07/09/2024
- Status changed from In Progress to Resolved
61850-7-2 (Ed2.1) 18.2.1 restricts setting GoEna while not fully configured. Table 87.
remove
DUT sends SetGoCBValues response+ and sends GOOSE with NdsCom=True ORUpdated by Richard Schimmel 6 months ago
- Status changed from Resolved to Closed
- Closed Reason Test Procedure Update added
- Closed Reason deleted (
--Not Set---)