Issues #5362
sGop2 and sGop4 check minimum MinTime and minimum MaxTime
Description
PIXIT entry Gp5 specifies the minimum MinTime and Gp10 the minimum MaxTime. We need to verify this as follows:
- update sGop2 to configure the minimum MaxTime
- update sGop4 to configure the minimum MaxTime
Files
Updated by Bruce Muschlitz almost 2 years ago
Also need to verify that changing SCL.maxTime results in a change to DUT behaviour
Also need to verify that changing SCL.minTime results in a change to DUT behaviour if PIXIT GP5 is "Yes"
Updated by Bruce Muschlitz almost 2 years ago
Propose to amend instructions for SCD file configuration to use PIXIT Gp5 and Gp10 value.
See attachment sGop2_test_MinTime_MaxTime_20220529.docx
Updated by Bruce Muschlitz almost 2 years ago
- Status changed from New to In Progress
- Discuss in Upcoming Meeting changed from No to Yes
Updated by Bruce Muschlitz almost 2 years ago
TPWG group edit: add check for mintime violation in expected result, add reference to PIXIT Gp10
Updated by Richard Schimmel almost 2 years ago
- File sGop2_sGop4_minimum_MinTime_MaxTime_20220628.docx sGop2_sGop4_minimum_MinTime_MaxTime_20220628.docx added
- Initial Test Document changed from Amd1 TP1.1 to Amd1 TP1.2
Updated attachment with sGop2 for (minimum) maxTime and sGop4 for (minimum) minTim
Updated by Joel Greene over 1 year ago
- Due date set to 08/09/2022
Review TP changes (attached) for approval 9 Aug.
Updated by IEC 61850 TPWG over 1 year ago
- Status changed from In Progress to Resolved
- Assignee set to Richard Schimmel