IEC61850-7-5 #6787
Harmonization of Table 4 with Figure 22
Start date:
05/15/2024
Due date:
% Done:
0%
Source:
Category:
Not yet categorized
TF 7-5 Project document:
IEC 61850-7-500
Related TISSUE:
Description
Table 4 shows a sequence where XCBR.Pos.opOk=FALSE occurs before XCBR.Pos [new] . This is not quite in line with the reality.
Figure 22 shows new Pos.stVal followed by exit/reset OpOk . This is correct.
In reality, the new position is observed by XCBR which will then both disable the output contact and reset 'OpOk' .
Propose to exchange the sequence of the two lines in Table 4 to state "exit/reset CSWI.OpOpn/Cls.general=FALSE GOOSE <-- XCBR.Pos [new]" before "exit/reset CSWI.Pos.opOk=FALSE GOOSE <-- XCBR.Pos.opOk=FALSE" .
Related issues