Issues #642
Blocked/Test-blocked does not impact CSWI->XCBR interface - Tissue Ready to Be Tested
Added by Herbert Falk almost 4 years ago.
Updated about 3 years ago.
Discuss in Upcoming Meeting:
No
Clause Reference:
20, Figures 40-4
Final Decision:
Remove sCtl29
Closed Reason:
--Not Set---
Description
The state "Operate" in the state machines indicates that OpOpn and OpCls are Set (entry) Reset (exit) while the state "MirrorCBlockedCommand" does not.
The only difference impacted by the Beh beeing blocked / test-blocked, vs beeing on /test is : Activate Output (entry), Desactivate Ouput (exit).
Therefore, even in the state "MirrorBlockedCommand", the CSWI.OpOpn and CSWI.OpCls are set and reset.
Files
- Test Case ID set to sCtl29
TPWG march 2, agreed with proposal SBOes. Richard to edit other control models, Thierry will review.
- Status changed from New to Triage
- Status changed from Triage to In Progress
- Status changed from In Progress to Resolved
- Status changed from Resolved to In Progress
- Discuss in Upcoming Meeting changed from No to Yes
- Initial Test Document set to http://www.ucaiug.org/org/TechnicalO/Testing/UCAIug%20Testing%20Quality%20Assurance%20Program/Current%20IEC%2061850%20Edition%202%20Testing%20Procedures/UCATestProceduresServer61850-8-1Ed2Amd1_Rev1p0.pdf
- Closed Reason Test Procedure Update added
TPWG meeting 20210309: Richard to create proposal for all 4 causes of sCtl29 (DOns, SBOns, DOes, sBOes)
- Closed Reason --Not Set--- added
- Closed Reason deleted (
Test Procedure Update)
TPWG discussion 20210309: Richard to create draft of updated sCtl29 for CB12a/b/c/d
TPWG 20210309: Richard to create draft of changes to sCtl29 for CB12a/b/c/d
E-mail Thierry:
Remember that in the past, SelOpn, SelCls, OpOpn, and OpCls were in the state machine.
They have been removed from the state machine (by by tissue 1696), as only operating CSWI.Pos issues OpOpn, OpCls, and the state machine does not only applies to CSWI.Pos.
This is a functional test: yes, let us remove the sCtl29 tests.
I discussed with Michael Haecker, and we said that the Mod/Beh shall be tested during the select phase, anyway.
Additionally, the test equipment would have had to send the opRcvd, opOpk to perform the test. This should have been also in the test.
- Status changed from In Progress to Resolved
- Final Decision set to Remove sCtl29
TPWG agrees to remove sCtl29
- Status changed from Resolved to Closed
- Discuss in Upcoming Meeting changed from Yes to No
- Updated Test Document set to Ed2Amd1 TP1.1
Also available in: Atom
PDF