Feature #588
More than one redundant PhysConn for ConnectedAP of IED AP and no redundant PhysConn on same AP
0%
Part 6 (9.4.6 bullet 3 of restrictions) states that there can be only one (maximum) RedConn if there is a Connection physical port
Resolve how RedCon are allowed
IEC 61850-6
Description
There is more than one redundant PhysConn for ConnectedAP of IED AccessPoint “S1”. In addition there are none redundant PhysConn on same AP.
<PhysConn type="Connection">
<P type="Port">1-A</P>
<P type="Plug">RJ45</P>
<P type="Type">100BaseT</P>
<P type="Cable">1</P>
</PhysConn>
<PhysConn type="RedConn">
<P type="Port">1-B</P>
<P type="Plug">RJ45</P>
<P type="Type">100BaseT</P>
<P type="Cable">2</P>
</PhysConn>
<PhysConn type="RedConn">
<P type="Port">1-C</P>
<P type="Plug">LC</P>
<P type="Type">FOC</P>
<P type="Cable">3</P>
</PhysConn>
Updated by Vladan Cvejic over 3 years ago
- Subject changed from There is more than one redundant PhysConn for ConnectedAP of IED AccessPoint “S1”. In addition there are none redundant PhysCon to More than one redundant PhysConn for ConnectedAP of IED AP and no redundant PhysConn on same AP
- Status changed from New to In Progress
- Standard(s) changed from 6 to IEC 61850-6
- Discuss in Upcoming Meeting set to No
Checking done.
Updated by Carlos Rodriguez del Castillo over 2 years ago
- Status changed from In Progress to Closed
- To discuss in WG10 set to No
Confirm to IEC 61850-6 editor this issue has been accounted for