Project

General

Profile

Issues #6211

TP1.2 Certificate tempalte makes sSvP12 mandatory while it shall be optional

Added by Hua Qin almost 2 years ago. Updated 9 months ago.

Status:
Closed
Priority:
Normal
Assignee:
Richard Schimmel
Due date:
02/07/2023
Discuss in Upcoming Meeting:
No
Clause Reference:
61850 Standard:
9-2
Triggering Tissue:
Final Decision:
Initial Test Document:
TP1.2
Updated Test Document:
TP1.3
Test Case ID:
sSvp12
Closed Reason:
--Not Set---
Triggering Tissue 2:
Triggering Tissue 3:

Description

Test case sSvp12 is optional depending on the PIXIT entry Svp3 - if the simulation mode is supported or not.
it is also shown in Table A4.2 as optional.
Current TP1.2 certificate shows it mandatory which shall be updated.

also, the current test case only test the preferred rate because it says using configuration in sSvP1 where only maximum preferred rate.
The backward rate is not tested .
It is suggested to add one more step saying Repeat the test for a backwards compatible configuration

#1

Updated by Richard Schimmel almost 2 years ago

  • Status changed from New to In Progress
  • Initial Test Document set to TP1.2
  • 61850 Standard 9-2 added

Agree move sSvp12 to conditional in the certificate template.
Disagree to repeat the test for backwards compatible. Not all SV tests are repeated for preferred/backwards, only a subset.

#2

Updated by IEC 61850 TPWG almost 2 years ago

  • Due date set to 02/07/2023
  • Status changed from In Progress to Resolved
  • Assignee set to Richard Schimmel

Agree move sSvp12 to conditional in the certificate template.
Disagree to repeat the test for backwards compatible. Not all SV tests are repeated for preferred/backwards, only a subset.

#3

Updated by Richard Schimmel 9 months ago

  • Status changed from Resolved to Closed
  • Updated Test Document set to TP1.3

Also available in: Atom PDF