Feature #545
SLD visualization issues in SCL
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Standard extension required
Start date:
Due date:
% Done:
0%
Estimated time:
ID:
26
Source:
IOP_2017/46
TF Unique ID:
26 # IOP_2017/46
WG10 Proposal:
(2019-06): SCL coordinates will remain as it is in Ed2.1 and will be removed in Ed.3 when IEC 61850-6-2 (HMI) is ready
Estimated Completion:
(2019-06) No target date was set.
Discuss in Upcoming Meeting:
No
To discuss in WG10:
Short Proposal:
Refer to HMI standardization group.
Standard(s):
IEC 61850-6-2
Needs More Information:
Assigned TF:
Description
Visualization issues:
1) IEC 61850-6 identifies a method of placing the SLD objects in the single line diagram. However, it does not address the size of objects that have been place.
2) Also the connectivity of the objects is not available in the SSD. Tools are connecting them per the internal logic.
Updated by Vladan Cvejic over 3 years ago
- Subject changed from Visualization issues: 1) IEC 61850-6 identifies a method of placing the SLD objects in the single line diagram. However, it doe to SLD visualization issues in SCL
- Status changed from New to In Progress
- Standard(s) changed from 2-Jun to IEC 61850-6-2
- Discuss in Upcoming Meeting set to No
Checking done.
Updated by Carlos Rodriguez del Castillo over 2 years ago
- Status changed from In Progress to Closed
Confirm to IEC 61850-6 editor that this issue has been accounted for.