Project

General

Profile

Bug #445

ExtRef use for GOOSE and SV subscription

Added by Herbert Falk about 3 years ago. Updated about 3 years ago.

Status:
Closed
Priority:
High
Assignee:
-
Category:
Already captured with TISSUE
Start date:
Due date:
% Done:

0%

Estimated time:
ID:
2
Source:
IOP_2013
TF Unique ID:
2 # IOP_2013
WG10 Proposal:

TISSUE 1400

Estimated Completion:
WG10 June 2015 Meeting
Discuss in Upcoming Meeting:
No
To discuss in WG10:
Short Proposal:

WG 10 shall come up with a selection and a specification of the preferred method to specify signal flow between IEDs from a system specification tool. This shall include the description what has to be included in an ICD / IID file (the input on the SCT) as well as what has to be added by the SCT to be included in the SCD.It shall as well include a discussion of the relation between ExtRefs at the engineering stage (SCL file) and InRefs/BlkRef later in the real time model.

Standard(s):

IEC 61850-6

Needs More Information:
Assigned TF:

Description

The actual format required for an ExtRef is not specified fully or in an understandable way.
Tools configured different combinations of values to create ExtRef.
A single unique mechanism, that is unambiguous, needs to be documented.

#1

Updated by Herbert Falk about 3 years ago

  • Priority changed from Normal to High
#2

Updated by Carlos Rodriguez del Castillo about 3 years ago

  • Subject changed from The actual format required for an ExtRef is not specified fully or in an understandable way. Tools configured different combinat to ExtRef use for GOOSE and SV subscription
  • Category changed from Standard clarification required to Already captured with TISSUE
  • Status changed from New to Closed
  • Short Proposal changed from WG 10 shall come up with a selection and a specification of the preferred method to specify signal flow between IEDs from a system specification tool. This shall include the description what has to be included in an ICD / IID file (the input on the SCT) as well as what has to be added by the SCT to be included in the SCD. It shall as well include a discussion of the relation between ExtRefs at the engineering stage (SCL file) and InRefs/BlkRef later in the real time model. to WG 10 shall come up with a selection and a specification of the preferred method to specify signal flow between IEDs from a system specification tool. This shall include the description what has to be included in an ICD / IID file (the input on the SCT) as well as what has to be added by the SCT to be included in the SCD.It shall as well include a discussion of the relation between ExtRefs at the engineering stage (SCL file) and InRefs/BlkRef later in the real time model.
  • Standard(s) set to IEC 61850-6
  • Discuss in Upcoming Meeting set to No

Checking done

Also available in: Atom PDF