Project

General

Profile

CIM Issues #4934

Modelling of PotentialTransformer and CurentTransformer

Added by Herbert Falk over 2 years ago. Updated 7 months ago.

Status:
Closed
Priority:
Low
Author/Contact Info:
Kendall Demaree
Base Release:
61970cim15v12
Solution to be Applied To:
CIM18v07
Solution Version:
CIM18v07
Solution Applied By:
Chavdar Ivanov
Completion Date:
10/08/2023
CIM Keywords:
Breaking Change:
Yes
Breaking Change Description:
Some attributes are deleted, but these are not used in WG13 profiles
CIM Impacted Groups:
WG13
Requestor:
Standard(s):
Version:
Clause:
Sub-Clause:
Paragraph:
Table:
Originally Closed in Version:
Origination Date:
12/16/2011
Origination ID:
13_108
Originally Assigned To:

Description

PotentialTransformer.ptClass is ambiguous string
String attribute has no real redefinition and is possibly redundent after addition of PotentialTransformer:type:PotentialTransformerKind attribute.


Proposed Solution

PotentialTransformer.ptClass and CurrentTransformer.ctClass usage is not clear.


Decision

Chuck investigates and come up with proper attribute names and descriptions. Refer also to IEC 60044-1.
2013-06-05/LOO

Oslo, 14 June 2023
- update the description of PotentialTransformer.accuracyClass
- clarify the PotentialTransformer.ptClass as burden designation

All attributes will need to be revisited. Note that there is an opinion that we should not add attributes to Sensor due to other impact.

See https://voltage-disturbance.com/power-engineering/potential-transformer-accuracy/

30-Aug-2023: Discussion concluded with the observation that this is Asset related and not an TF13 Wires task. These attributes should be removed as it is not necessary for wires-based application.

11 Oct 2023 - TF13 call
Close the issue and leave the remaining attributes (after the deletion of accuracyClass, ptClass and ctClass) with the expectation that if there’s an issue or they are not needed someone will raise this.


Release Notes

The following attributes were removed as they are Asset related, they are not necessary for wires-based application and should not be in the Grid package.
- PotentialTransformer.accuracyClass
- PotentialTransformer.ptClass
- CurrentTransformer.accuracyClass
- CurrentTransformer.ctClass

#1

Updated by Chavdar Ivanov over 1 year ago

  • Subject changed from PotentialTransformer.ptClass is ambiguous string String att to PotentialTransformer.ptClass is ambiguous stringString att
  • Status changed from Open to Review
  • Base Release changed from 61970cim15v12 to 61970cim15v12
  • Decision updated (diff)

WG13 to discuss if this is stil actual. Check with Chuck if input is ready.

#2

Updated by Chavdar Ivanov 11 months ago

  • Subject changed from PotentialTransformer.ptClass is ambiguous stringString att to Modelling of PotentialTransformer and CurentTransformer
  • Proposed Solution updated (diff)
  • Decision updated (diff)
#3

Updated by Chavdar Ivanov 11 months ago

  • Status changed from Review to In Progress
#4

Updated by Todd Viegut 9 months ago

  • Proposed Solution updated (diff)
  • Decision updated (diff)
#5

Updated by Chavdar Ivanov 7 months ago

  • Solution to be Applied To set to CIM18v07
  • Solution Version set to CIM18v07
  • Solution Applied By set to Chavdar Ivanov
  • Completion Date set to 10/08/2023
  • Release Notes updated (diff)
#6

Updated by Chavdar Ivanov 7 months ago

  • Breaking Change changed from No to Yes
  • Breaking Change Description set to Some attributes are deleted, but these are not used in WG13 profiles
#7

Updated by Chavdar Ivanov 7 months ago

  • Status changed from In Progress to Closed
  • Decision updated (diff)
#8

Updated by Todd Viegut 7 months ago

  • Solution to be Applied To changed from CIM18v07 to 18v07
#9

Updated by Todd Viegut 7 months ago

  • Solution to be Applied To changed from 18v07 to CIM18v07

Also available in: Atom PDF