Project

General

Profile

Feature #411

Protection parameters not defined in P logical nodes

Added by Herbert Falk about 3 years ago. Updated about 3 years ago.

Status:
Closed
Priority:
Normal
Assignee:
-
Category:
Profile or Guideline
Start date:
Due date:
% Done:

0%

Estimated time:
ID:
4.3
Source:
ENTSO-E
TF Unique ID:
4.3 # ENTSO-E
WG10 Proposal:

A users group may require in a profile or guideline for protection IEDs, that all configuration parameters shall be exposed to IEC 61850 - either using standardized ones or doing model extensions

Estimated Completion:
Discuss in Upcoming Meeting:
No
To discuss in WG10:
Short Proposal:

(3) Protection parameters are today optional and not all of them are defined. Work is ongoing to define more. At the end, the user needs to specify the requirement to have the protection parameters available in IEC 61850 format

Standard(s):

IEC 61850-7-4, 7-3

Needs More Information:
Assigned TF:

Description

Not all protection parameters are defined in protection logical nodes.
There should be a guideline or profile for managing this issue.

#1

Updated by Herbert Falk about 3 years ago

  • Status changed from New to Closed
#2

Updated by Vladan Cvejic about 3 years ago

  • Description updated (diff)
  • Standard(s) set to IEC 61850-7-4, 7-3
  • Discuss in Upcoming Meeting set to No

Checking done.

Also available in: Atom PDF