Project

General

Profile

CIM Issues #5803

Add meterReadingPeriodicity attribute (String) in the MarketEvaluationPoint class

Added by Herbert Falk over 2 years ago. Updated over 2 years ago.

Status:
In Progress
Priority:
Normal
Author/Contact Info:
Jan (ebIX 2019/7)
Base Release:
iec61970cim17v34_iec61968cim13v12_iec62325cim04v07
Solution to be Applied To:
Solution Version:
Solution Applied By:
Completion Date:
CIM Keywords:
Breaking Change:
Breaking Change Description:
CIM Impacted Groups:
None
Requestor:
Standard(s):
Version:
Clause:
UsagePoint?(originally MarketEvaluationPoint)
Sub-Clause:
Paragraph:
Table:
Originally Closed in Version:
Origination Date:
12/18/2019
Origination ID:
16_0087
Originally Assigned To:

Description

Add meterReadingPeriodicity attribute (String) in the MarketEvaluationPoint class [0..1]

This will inform the Energy supplier how often meter readings are done. E.g. every day, every month, yearly. This indicates how often the values may be reported.
The suggested definitions was: The length of time between the regular meter readings.

Proposed Solution

Discussed with WG14, the suggestion was to use the attribute readCycle from UsagePoint.
Definition of readCycle is: Cycle day on which the meter for this usage point will normally be read. Usually correlated with the billing cycle.

Still to verify: does readCycle match the needs? Compare also with previous issue.
The datatype "string" will make it possible to have the datatype "duration" in the profile.

#1

Updated by Becky Iverson over 2 years ago

  • Status changed from New to Open
  • Proposed Solution updated (diff)
  • Clause changed from UsagePoint? (originally MarketEvaluationPoint) to UsagePoint?(originally MarketEvaluationPoint)
#2

Updated by Alvaro Marciel over 2 years ago

Added a meterReadingResolution in AccountingPoint class. Issue can be closed.

#4

Updated by Becky Iverson over 2 years ago

  • Status changed from Open to In Progress

Also available in: Atom PDF